OPEN MIND Introduces hyperMILL® 2024 CAD/CAM Software Suite

featuring a Range of Enhancements, New Capabilities for Optimizing Toolpaths and More

OPEN MIND Technologies, a leading developer of CAD/CAM software solutions worldwide, has introduced its latest hyperMILL® 2024 CAD/CAM software suite which includes a range of powerful enhancements to its core toolpath capabilities, as well as new functionality for increased NC programming efficiency in applications ranging from 2.5D machining to 5-axis milling.

“As a result of our continuous research and development, the introduction of hyperMILL® 2024 offers our customers a breadth of core toolpath enhancements and new features to optimize the digital process chain and manufacturing operations,” said Mr. Alan Levine, Managing Director of OPEN MIND Technologies USA, Inc.

New and Enhanced CAM Capabilities

An Optimized Deep Hole Drilling CAM strategy offers improved machining reliability by providing a user-friendly interface with process-relevant parameters clearly defined on a new process tab. New capabilities enable coolant and dwell time stages to be identified, allow a chip break to be integrated into a drilling process, and more. A new single-tip gun drill tool simulation function provides precise collision checking and a detailed visualization of the stock removal.

A new algorithm for 3-axis and 5-axis Rest Machining ensures automatic, complete detection of all rest material areas, in addition to optimized toolpath calculations for faster, reliable machining. Toolpaths are now optimally divided to ensure more efficient machining, and the detection of intersection areas where paths meet has been optimized for collision avoidance.

An additional toolpath improvement is an enhanced path layout for the 3D Plane Machining cycle. The new strategy has a smoother path and fewer pick-ups. While the toolpath length (distance) may be longer in some cases, the machining time, as tested on a variety of NC controllers, has been reduced.

hyperMILL® “CAM Plan” calculates the optimum point distribution based on part topology data.

A new, novel generation of programming assistance and analysis, “CAM Plan” is introduced in hyperMILL® 2024, simplifying various programming tasks and identifying possible sources of error. Predefined workflow steps safely guide users through the preparation and programming process, while the geometries and features required are automati cally created. Also, potential errors are flagged for removal such as double surfaces or gaps between model patches.

Once the data is organized, the CAM workflow can be processed with more intelligence and higher efficiency. The first benefit from hyperMILL® CAM Plan is that component topology is analyzed to produce a precise toolpath that has command locations aligned with key geometric features and with optimized point distribution for milling. The result is improved surface finishes, easier processing by NC controllers, and reduced machining times.

Optimizing VIRTUAL Machining 

For easy generation of 3-axis and 5-axis NC programs with axis change and an optimized use of the workspace, the NC Optimizer feature in the hyperMILL® VIRTUAL Machining strategy now offers the option to transform X- and Y-axis movements into a single movement with the rotation axis in the table. By swapping axes, an XY movement is transformed into a simultaneous CX movement which eliminates rewind movements during machining. This is especially impactful on machines that have a limited linear axis range.

Measuring points read back for improved quality and process control. The 3D model of the component shows at a glance which measuring points are outside the tolerance.

The reading back of measuring points when using hyperMILL® VIRTUAL Machining is a new feature that allows graphical representation of measured points on the part model, rather than comparing a list of measurement results. Users can also quickly identify measuring points that are out of tolerance on a 3D part model and compare trends over sequential measurements. As a result, it is much easier to analyze and compensate for inaccuracies and tool wear after milling.

About OPEN MIND Technologies AG

OPEN MIND Technologies AG is one of the world’s leading developers of powerful CAD/CAM solutions for machine and controller-independent programming. OPEN MIND develops optimized CAD/CAM solutions that include a large number of innovative and unique features that can deliver significantly higher performance in both programming and machining. hyperMILL® is a completely modular CAD/CAM solution that provides state-of-the-art CAM technologies on its own CAD platform: from 2.5D, 3D and 5-axis machining as well as turning strategies and solutions for additive manufacturing, HSC and HPC machining. Whether automation, simulation or virtual machine – trendsetting technologies expand the product range and enable continuous digital process chains. Special applications, the perfect interaction with all popular CAD solutions and a customer-oriented service complete the product range.

According to the “NC Market Analysis Report 2023” compiled by CIMdata, hyperMILL® is ranked in the top four CAD/CAM solutions worldwide. The innovative CAD/CAM technologies fulfill the highest demands in the automotive, tool and mold manufacturing, production machining, medical, job shops, energy, semiconductor and aerospace industries. OPEN MIND is a Mensch und Maschine company and has subsidiaries and qualified sales partners on all continents.

You can find more information at

SUBSCRIBE to our Complimentary Publications: