HIGH TORQUE AUTO: Optimizing Tool Life & Tooling Cost Containment

JM PERFORMANCE PRODUCTS’ PATENTED HIGH TORQUE RETENTION KNOBS AIM TO RESOLVE THE TOOLING BUDGET CONTAINMENT CHALLENGE.

AUTOMOTIVE INDUSTRY / TOOLING COST CLIMATE:

Automotive industry manufacturers have basic requirements from their suppliers– they want on-time delivery, accuracy, and sufficient available stock. They want perfect parts, but they want them to be immediately available at a price they can control. Automotive industry suppliers need to have the ability to maintain production volume and quality, while maintaining a competitive edge through cost containment.

The big automotive companies hold their suppliers to very strict requirements relative to quality while expecting them to be very flexible in response to fluctuating demand, and still produce parts as economically as possible.
Nearly every component manufactured for use in the automotive industry has CNC manufacturing involved in its production. Perhaps it’s time for automotive manufacturers to take a giant step backward and get down to the basics of manufacturing issues that exist on the production floor, which cost the industry billions of dollars per year and go largely unrecognized.

Tooling is a vital and often overlooked process in the production of automobiles, as every single part of a new car requires a unique tool. What if an invisible problem inherent to CNC manufacturing existed? What if an actual flaw in the tooling was robbing manufacturers of the ability to produce parts accurately, and interfering with the production rates and cost containment? One of the major initiatives at the forefront of today’s automotive manufacturing community is to answer these challenging tooling cost containment questions and find progressive solutions therein.

HIGH TORQUE INCEPTION / TOOLING COST REVELATION:

A few years ago, Boeing (Seattle, WA) contacted one of their tooling manufacturers, Briney Tooling Systems (Bad Axe, MI), a leading supplier of CNC tool holders and shrink fit tooling systems in North America, reporting that they had performed testing that revealed a flaw in the V-flange tooling they were using. Requesting a solution, Briney reached out to JM Performance Products, Inc. (JMPP: Fairport Harbor, OH / formerly J&M Machine) to elicit their assistance in resolving the problem Boeing described. In turn, within the following week, JMPP began an intrinsic investigation and ultimately designed a gage that mirrors the interior grind of a CNC spindle. This gage measures movement or growth of the toolholder taper down to 7.5 millionths inch in diameter.
JMPP identified that the essential flaw, the invisible problem plaguing CNC manufacturers, as toolholder expansion. Using their gage to perform extensive testing, JMPP proved that toolholder expansion is caused by the installation of a standard retention knob into a V-Flange holder.

Briney had reported expansion of their holders with as little as 13 ft./lbs. of torque during retention knob installation. This expansion creates a bulge in the holder at the small end, causing the holder to make contact with the small end instead of the large end. This effectively reverses the way the toolholder is designed to fit the spindle, allowing the holder to move randomly within the spindle. This movement results in a loss of contact between the spindle and the toolholder, and causes a laundry list of issues: vibration and chatter, excessive run-out, poor finishes, shortened tool life, high power consumption, excessive spindle wear, need to slow down, and the need to reduce the depth of cuts.

Using the taper shank test fixture, JMPP redesigned the knobs, finally reaching a design that eliminated or substantially eliminated toolholder expansion. Their patented High Torque retention knobs are designed to thread deeper into the bore of the holder where there is a thicker cross-section of material to resist deformation.

Boeing’s major complaint was associated with the vibration and chatter–that was causing tolerance and finish issues on extremely expensive parts. The introduction of the High Torque knobs effectively eliminated the chatter issues. Once the knobs were made available to the general milling population, JMPP began to get feedback from customers that served to emphasize how rampant and detrimental a problem toolholder expansion represented to the manufacturing community.

CLIENT COST CONTAINMENT / TOOLING CHALLENGE PROFILE:

Schuster Mechanical, LLC (Detroit, MI), a growing CNC job shop focused on auto test equipment, was investigating new CNC machine investments which included TRAK 2op and TRAK LMP. The TRAK 2op is the first portable (2.5’ x 4’ footprint) VMC to focus on Second Operations Work, featuring an 8-station tool changer, and 10,000 RPM spindle. The TRAK LMP VMC is a low volume/high mix production system that incorporates technologies to markedly reduce the changeover times that plague high-mix, low-volume shops.

Owner Robert Schuster wanted to proactively ensure that his spindle cartridge would last

The CNC milling machine or machining center cutting the mold part.Injection mold insert making by CNC machine.

as long as possible to maximize the dependability and productivity of the new machining centers. Schuster engaged with JMPP’s sales engineering personnel at an industry trade show, who showed him how their knob’s threads ran deeper into the holder–causing less distortion at the small end of the taper. Schuster was immediately impressed that his holders were not damaged by the expansion caused by the standard knobs, and could still be used in production with the High Torque knobs–with no spindle damage occurring.

Initially, Schuster was considering implementing an HSK toolholder system, but found that it was an expensive system that had too many limitations to justify conversion from V-Flange. The HSK design features a cup-shaped holder that doesn’t provide a long reach, the socket is shallow, and the walls are thin. The High Torque knobs maintain spindle/taper contact, with the benefit of the more affordable V-Flange CAT/BT holder system.

Subsequently, Schuster determined JMPP’s BT30 knobs (JM31109HT) would be a more cost-effective solution to extend the life of the new VMC machines. According to Schuster, “Dependability of the machining center is very important, and using the JMPP High Torque retention knobs should reduce the failures associated with traditional retention knobs. I specifically like the low tightening torque required to seat the retention knob into the tool holder. I immediately implemented about 30 of these and plan to use them exclusively on all of my TRAK machines/V-Flange systems moving forward.”

HIGH TORQUE / CARBIDE TOOL TEST:

Increasingly, the automotive industry is using more carbide tools primarily because they can cut both aluminum and hard materials such as titanium, carbon, and exotic alloys at high speeds. Carbide tooling is expensive and also fragile, so it’s imperative to watch for microfractures which yield poor surface finishes. If a microfracture occurs, the whole tip may disappear and the inserts can be rendered useless.

Recently, Sandvik, Inc. (Fair Lawn, NJ), a high-tech and global engineering Group with about 42,000 employees, lent out one of their engineering representatives to test the best retention knobs for Caterpillar® with a $1,200 solid carbide tool. The specification included: a toolholder, retention knob, tightening spec, proper placement, and then lock it down. The test’s goal was to get the custom carbide tool to run without shattering.

A variety of standard retention knobs did not work. When tested with JMPP’s High Torque knobs tightened to their provided torque specifications, it worked every time with no tool shatter. After witnessing the dramatic testing results, the Sandvik rep stated, “The JMPP knobs may be the biggest savings to the industry for the next ten years. They are better, faster, provide unbelievable feeds, and can reduce set up times by 40-60%.”
V-Flange tooling by design should be the most efficient, precise and cost effective tooling system available.

The fact is, a carbide tip cannot vibrate when it makes contact, or it shatters. Essentially, carbide must smoothly enter into the pocket and maintain its position in the pocket or it breaks. Carbide can last a long time with the right chip load and RPM. It could last weeks, but let it vibrate and it could be minutes. JMPP’s High Torque knobs have been proven to extend carbide tooling life.

HIGH TORQUE AUTO / CONCLUSION:

Ultimately, by making a simple change…moving to the High Torque retention knobs, CNC manufacturers across the board can eliminate the vast majority of issues, improve their milling operations, and get the best results while saving money. Moreover, this solution creates a real opportunity for U.S. tool shops to grow along with their automotive OEM and Tier One customers in creating progressive tooling cost containment solutions.

This High Torque solution is so potent, that JMPP guarantees the results their customers have been realizing on any V-flange toolholder that is made to the AT3 or better taper tolerances. They offer to provide High Torque retention knobs at no charge for testing purposes to any manufacturer willing to provide tracked tool life prior to and post-installation of the knobs. JMPP maintains that their High Torque retention knobs are the only tool that can deliver increased productivity and performance on virtually every V-flange tool used in CNC manufacturing.

For more detailed information contact: www.jmperformanceproducts.com

About CORPORATE PROFILE

Established in 1966, JM Performance Products, Inc. (JMPP) has firmly established itself as a leading manufacturer of CNC mill spindle optimization products. Across a myriad of markets, JMPP is dedicated to reshoring with over 500 styles of patented Retention Knobs for BT, DIN, ISO, and CAT toolholders from 30 taper to 60 taper−all manufactured and material sourced in the United States! All products in the integrated suite are engineered to optimize milling machine performance including: improving finishes, eliminating run-out, reducing chatter and harmonics, decreasing set-up times, extending tool life, and increasing spindle performance.

Author: John Stoneback / JM Performance Products, Inc. / 440.357.1234 / jstoneback@jmppinc.com
Editorial & Photo Contact: Ray Farrar / Method Media LLC / 216.861.0862 / rayf@methmedia.net

Established in 1986, IMD is a monthly publication that serves the owners and managers of America’s most diversified job shops, machine shops, OEM / MRO, contract manufacturers and production line manufacturing. This dedicated metalworking audience is the driving force behind U.S. manufacturing. Our readership is audited by EDA (Equipment Data Associates). EDA is audited by (Verified Publication Audit).