Carell Corporation has introduced the 310HV4 Angle Roll with 6″ Pipe and 6″ Angle bending capacity. This is a 3 driven rolls, double initial pinch, fully hydraulic Universal Roll Bending Machine with independent hydraulic adjustment of both lower bending rolls and hydraulic powered rotation of all three rolls. Lateral guides are hydraulic powered in all three axii (6 directional movements). All Carell Universal Angle Rolls are ideal for rolling standard or special profiles, tube/pipe as well as beams in a variety material types and alloys. Tooling for angle iron leg-in and leg-out is standard. The 310HV4 shown above is equipped with an articulated overhead pendant control arm allowing maximum operator mobility and safety.
Demonstrating that “quality is always found in the details” the 310HV4 boasts 2 LED Digital Displays to monitor bending roll positions and 6 LED Digital Displays to monitor all lateral material guide positions. Each machine is built beginning with a rugged, rigid and reinforced, one piece solid steel weldment frame that is stress relieved and then CNC machined. All shafts are of high strength alloy then heat treated and ground for durability and precision fit.
The 310HV drive train is 100% hydraulic using 3 independent radial piston hydraulic motors and planetary speed reducers direct coupled to each main roll shaft for 100% torque transmission to the work piece. Hydraulic drive trains require near zero maintenance. The hydraulic drive train features infinitely variable speed rotation, 0-23 fpm, using a digitally driven hydraulic proportioning valve and a control panel mounted potentiometer. Hydraulic pumps are driven by a 30HP TEFC IEC high efficiency electric motor.
The Standard Universal Bending Roll Tooling Set uses telescoping modular components and includes 9 major roll components machined from NiCrMo Alloy steel which is induction hardened for extended life. Nominal roll diameters are 18.75″ O.D.
The 310HV4 weighs 20,500lbs and is set up for operation in the horizontal working plane. Machines of this size, 6′ x 8′ x 7’h, can be placed in a machine pit to afford a lower working height. Effective bending force is designed for profiles and sections a section modulus from 9 to 15 cubic inches.
For more information, visit www.carellcorp.com or contact sales@carellcorp.com.
Carell Corporation
P. O. Box 850
Stapleton, AL 36578
P: (251) 937-0948
F: (251) 937.0957
